How to Use a Distillate Cartridge Filler

How to Use a Distillate Cartridge Filler

A distillate cartridge filler is a key component to producing your own custom vape carts. This equipment allows you to make high-quality cartridges with precision and efficiency.

Most of these machines consist of a heating barrel, an injection syringe, and a holding tray to hold cartridges during the process. They are available in a variety of styles and price points with different lead times, production rates and service/warranty offerings.

Heat

Whether you’re a beginner or an experienced vaper, learning how to fill a cartridge or dab rig cart manually is a big step in any smoker’s journey. While the specific process varies depending on your concentrate and method of use, the general steps are the same. The key is to have the right equipment, the right sized syringe and the proper tools for handling your extract.

First, you’ll want to warm your distillate with indirect heat to a liquid consistency. The amount of heat you need to reach is based on the viscosity and type of oil you’re using. Once your product reaches this point, you’ll then add your terpenes. The amount you need to add is typically anywhere from 5% to 15% of your overall distillate, so a little goes a long way. Stir the mix to get an even distribution.

Finally, you’ll take your syringe and insert it into the reservoir of your cartridge and inject. This process works best when your syringe and cartridge filler machine cartridge are hot. If you’re having trouble, it could mean that your product is not heated enough or the ratio of terpenes is off. Either way, it’s easy to fix! If you’re having problems, try heating your syringe and tank/cartridge again. If this doesn’t work, you may need to clean your syringe with alcohol.

Terpenes

When making extracts, natural terpenes are destroyed in the extraction process and must be added back in to give the oil its distinct aroma and flavor. A good terpene will also help to lubricate the cartridge and make it easier to use.

The best place to start is by adding a small amount of your chosen terpenes to the warmed distillate in a heat resistant mixing container. A glass beaker is ideal but you could also use a small jar or bowl. Stir the mixture gently until it is combined. For a general ratio it is recommended to use 5-10% terpenes, but this can be adjusted depending on personal preference.

Once you are satisfied with the terpenes in your mix, it is time to begin filling the cartridges. This can be messy and requires patience. You want to be careful not to overfill the cartridges or you will risk the mouthpiece falling off inside the cartridge.

It is also important to note that you should always pre-heat your cartridge before using it. All of our batteries include a pre-heat function that will run a low voltage for 10 seconds or so, melting the oil and warming it up. This is essential for a smooth and consistent vaping experience. It will also prevent any burnt or dry taste and ensure that the vape is not clogged.

Syringes

Whether you want to fill your own personal cartridges or are looking for a way to mass produce carts for distribution, you will need syringes. Using a syringe is one of the best ways to ensure that the amount of oil you are injecting into each cart is consistent. A syringe also allows you to add your preferred terpenes to the oil to create a specific flavor and effect.

When using a syringe, it is important to heat the oil and the syringe to a temperature that will allow for easy transfer of the liquid. Once the syringe and the oil are warm enough, you can begin the process of filling your cartridge. It is important to remember not to overfill the cart as this can damage the coils. Additionally, it is a good idea to work over a silicone mat in case of any spillage.

Once the syringe is loaded with your desired amount of distillate, you can insert the needle into the cartridge and push the oil down until it reaches the fill line. It is a good idea to screw the top back on after you are done. You can cannabis oil filling then place the cart in an oven at a low temperature (around 100-140 degrees Fahrenheit) to ensure that the oil is fully saturated before using.

Vape Cartridges

When you are done with your distillate and ready to fill a cartridge, you will need to have a few different things on hand. First, you will want a syringe with a blunt tip needle and a leur lock. Next, you will need a small glass heat resistant container for the mix such as a small beaker or a jar. Finally, you will need a cartridge to use with your device. There are many different types of cartridges on the market, some that can be adjusted for temperature and some that connect to apps that track your dosage.

Cartridges are available in a variety of sizes from 0.5ml all the way up to a full gram. You should choose the size based on your preferred experience and effects. If you are new to vaping, a smaller capacity is a good option so that you can easily control your dose and adjust for future sessions.

Once you have your cartridge and a syringe, the process is relatively simple. Start by inserting the needle into the cartridge and carefully dispense the oil. Be sure to leave a little room at the top of the cartridge for air, and remove the needle when you are almost at the end. This will help prevent overfilling the cartridge and clogging your device. Once you have your desired amount in, screw the cartridge back on and store upright.

Leave a Reply

Your email address will not be published. Required fields are marked *